Micro thin film type sensor probe 200cm length
Product description
The item is one Micro thin film type sensor probe 200cm length. The
micro thin film type sensor probes are encapsulated with epoxy in
polyimide tubes with polyesterimide insulated #38 AWG solid nickel
wire leads. They feature paralell bonding and come in standard
overall lengths of 3, 6 and 12 inches. These thermistor probes are
ideal for use with small probe housing and applications that
require fast thermal response time.
Engineering Information
Typical diameter 0.023 inches
Typical wire size #38 AWG
Leads: solid nickel, polyesterimide insulation
Materials: epoxy, polyimide
Typical Dissipation Constant: 0.2mW/℃ in still air
Typical time Constant in still air: 3 seconds max
Micro thin film type sensor probe 200cm length
Resistance / temperature characteristics
| Temperature (℃) | 223Fu5 |
| -10 | 100.3 |
| 0 | 62.92 |
| 10 | 40.56 |
| 20 | 26.82 |
| 30 | 18.16 |
| 40 | 12.58 |
| 50 | 8.892 |
| 60 | 6.407 |
| 70 | 4.700 |
Reliability data
| Item | Test conditions | Criteria |
| Free fall | Three times natural fall to a maple board from 1 m height | △R, △B±0.5% |
| Dry heat | 1000 hours at 70℃ | △R, △B±0.5% |
| Damp heat | 1000 hours at 70℃ and 90% to 95% humidity | △R, △B±0.5% |
Temperature cycle (thermal shock) | Seven cycles as below: 1. -20℃ for 12 hours 2. Room temperatur for 1 minute 3. 55℃ for 12 hours 4. Room temperature for 1 minute | △R, △B±0.5% |
Connection method
The lead wire can be soldered to larger wires by winding it around
the larger wire and then soldering.
Micro thin film type sensor probe 200cm length
Caution
The miniature NTC thermistor sensor probe is manufactured using a
semiconductor process. Due to its microstructure the sensor is
sensitive to
electrostatic discharge in just the same way as common integrated
circuits are.
In order to prevent damage to or failure of the sensor recommends
to take appropriate precautions against when handling it.
Failure to protect the sensor against ESD may also cause damage to
the equipment installed with the sensor, because electrostatic
discharge can cause small parametric changes, which means that the
sensor may not meet its published specification.
Product image
Product Applications
Medical catheters
Guide wires
Testing equipment
Handheld medical devices
Body temperature monitoring
Other applications that require very small probes
(1) Lead wire length customized according to customer requirements
(max.200 cm).
(2) Bare lead wire length customized according to customer
requirements
Please contact Jingpu sales staff for products without resin
coating on the sensor head for even smaller diameter/.
