Micro NTC Thermistor Medical Temperature Sensor For Temperature
Measurement
Brief Introduction:
The item is one miniature medical temperature sensor NTC
thermistor. The miniature medical temperature sensors are
encapsulated with epoxy in polyimide tubes OD
0.3mm&OD0.6&OD1.0. It takes the enamelled wire OD
0.05*2mm&OD0.12*2&OD0.2*2 as the lead wire.
Features:
Miniature designed
Fast thermal response time, for example, several seconds
Operating temperature range: 0℃~100℃
Application:
Ablation temperature monitoring
Blood temperature monitoring
Incubators, patient warming, and endovascular cooling sensors
Structure and Dimensions:(Unit: mm)
| NO. | Name | Material Specification | QTY. | Remarks |
| 1 | Chip | NTC Chip | 1 | / |
| 2 | Encapsulation | Epoxy resin | 1 | / |
| 3 | Tube | PI φ1.0 | 1 | / |
| 4 | Wire | Enamelled wire OD0.12*2 | 1 | / |
Standard packing (inner packing): 1 pcs/polybag
Operation Notice:
1. Application: Temperature measure ；
2. The current flowing through the NTC is controlled within the
Pmax range to avoid the measurement error caused by the
self-heating of the component.
3. Avoid excessive heat shock, The hot air blow should beat at
least 30mm to the probe in case a heat-shrink protection tube needs
to be attached.
4. Storage Temperature -10℃～40℃,≤75%RH； Avoid a corrosive gas and
sunlit environment; After opening the package, it needs to be
sealed again.
5. According to the structure of the Glass coating NTC thermistor,
when the end-user is installed, to avoid the epoxy head being
subjected to too much tensile force and bending force from the lead
wire, The lead wire shall be controlled at a bending point or a
force point on a lead wire 6mm or less below the sealing head. So
as not to hurt the chip, resistance drifting and even open circuit,
especially when the component is heated.
Product Images:
